Cleat MK1 racing junior with roller flat for rope ø 3-6mm, hole centre 66mm

The bottom roller of the Clamcleat® CL230 allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface.  Can also be rigged on a rope for 1:1 or 2:1 advantage.

Available in two finishes:
- CL230 has a silver stove enamel finish for a cost effective, high quality coating.
- CL230AN has a hard anodised finish to give a harder wearing surface.

A nylon version also available for lower loads - see CL203/S2 below. 

CL230 is ideal for through-deck and through-mast applications.  Images show it being used for Cunningham and Kicker controls on an International 14 dinghy. Also for tensioning the sunshade on the Wajer 38 powerboat. The CL824 pad can be used to raise CL230 so roller is above a surface. Allows a round hole to be drilled for the rope.

The CL230 can also be rigged on a rope. We recommend using a PT230SSE to aid rope release. For trapeze adjustment, with 4 or 5mm ropes, a CL834 handle can be fitted. (A lower cost alternative to the PT230SSE is PTLINK)

Technical Details
Rope Diameter 3 - 6mm
Material Aluminium
Hole Centres 66mm
Length 82mm
Width 18mm
Height 23mm
Bolt Size M5
Screw Size 4.8
Weight 35gms